JVC CU-VS100U ユーザーズマニュアル

Using an HDMI cable to connect the player to TV that supports HDMI CEC-compliant linked operation allows you to use the 

convenient functions outlined below.

Preparation

• Connect the player to the TV using an HDMI cable (P.6).

• Turn on the TV and set “HDMI control” in the Setup menu to “On” (actual 

menu and item names diff er depending on the TV used).

• Turn on the player and set “HDMI control” in “General” in the SETUP menu to 

“On” (P.13).

Language : 

English

Repeat : 

Off

HDMI control 

: On

Overlay Bitmap 

: Off

Reset

Procedure 1

• Insert an SD card

  (Turn the player on beforehand.)

• The TV input automatically switches to HDMI input.

  (Turn the TV on beforehand.)

Procedure 2

• The player automatically turns off .

• Turn off  the TV.

Note

• Depending on the connected TV, turning on the player may automatically turn on the TV and switch it to HDMI 

input.

• If a device such as an amplifi er or selector is connected, it may malfunction. Set "HDMI control" to "Off ".

• HDMI CEC (Consumer Electronics Control) is an industry standard that allows interlinked operation between 

compatible devices when they are connected via an HDMI cable.

• Not all HDMI-compatible devices are compliant with the HDMI CEC standard. If the connected device is not 

HDMI CEC-compliant, the HDMI control function on the player will not work.

• The player is not guaranteed to work with all HDMI CEC-compliant devices.

• Even among HDMI CEC-compliant devices, the functionality provided diff ers depending on the specifi cations 

of the particular device. Accordingly, some of the functions linked with this device may not work. (Refer to the 

instruction manual provided with your TV.)

• With some connected devices, the interlinked functions may not operate as intended. If this occurs, set "HDMI 

control" to "Off ".

Caution

• Once the power cable has been disconnected, the player will not operate even if "HDMI control" is set to "On". 

Turn the player back on by pressing the power button.

HDMI cable (optional)

2M50101A_ENG.indd   14

2M50101A_ENG.indd   14

10/7/2009   15:50:03

10/7/2009   15:50:03