JVC RV-NB10B ユーザーズマニュアル

English

Use the sleep timer to turn the system off after a certain number of
minutes when it is playing. By setting the sleep timer, you can fall
asleep to the music and know that your system will turn off by
itself rather than playing all night.

■

You can set the sleep timer only when the system is turned on.

■

1. Press SLEEP.

The SLEEP indicator lights up on the display.

■

2. Set the length of time you want the source

to play before shutting off.

Each time you press the button, it changes the number of
minutes shown on the display in this sequence:

120

OFF

(back to the

beginning)

After setting the number of minutes for the sleep timer, the
indication will stop flashing and go off.
The system is now set to turn off after the number of minutes you
set.

To confirm the sleep time:

When SLEEP is pressed, the remaining sleep time is displayed.
Wait until the display returns to the original display.

To cancel the sleep timer:

Press SLEEP repeatedly to select “OFF.” Turning off the system
also cancels the sleep timer.

Once the timer has been set, it will be activated at the same time
everyday until the timer is turned off. Recording timer works only
one time.

• While the timer is being set, the timer indicator (

) lights up.

• While the timer has been set, the timer indicator (

) also lights

up if the power is supplied through the AC outlet.

• While the timer is working, the timer indicator (

) flashes.

■

1. Press

ON/STANDBY.

■

2. Press CLOCK/TIMER.

“TIMER ON?” appears.
• Press SET to activate the timer setting you have made before.
• Press CANCEL to cancel the timer.
• Go to the next step to set the timer first time (or reset the

timer).

■

3. Press CLOCK/TIMER again, so that the

timer indicator (

) and ON indicator light

up.

The hour digit of the current ON time flashes on the display.

■

4. Set the on-time you want the system to

turn on.

(1)

Press

to select the hour, then press SET.

(2)

Press

to select the minute, then press SET.

The OFF indicator lights up.
• Press and hold the button to change the time rapidly.
• If you want to change the time setting, press CANCEL.

■

5. Set the OFF time (example: PM1:30).

(1)

Press

to select the hour, then press SET.

(2)

Press

to select the minute, then press SET.

• Press and hold the button to change the time rapidly.
• If you want to change the time setting, press CANCEL.

■

6. Press

to select the music source

you want to listen to, then press SET.

Each time you press the button, the display changes as shown
below:

TUNER

TAPE

(back to the

beginning)

When you select the “TU

TAPE”;

• The REC indicator appears on the display.
• The timer will be canceled after tuner recording has been

finished.

■

7. Press

to select the volume level,

then press SET.

– –:

The current volume level will be used.

0 to 50: When the timer is turned on, the volume will be

automatically set to the selected level.

• The current timer setting appears for confirmation.

Setting the sleep timer

Using the remote control only

Setting the daily timer

Using the remote control only

RV-NB10[C].book Page 19 Saturday, January 21, 2006 11:33 AM