Olympus 142665 ユーザーズマニュアル
20
1
EN
Po
we
r s
we
r s
u
p
p
ly
Power supply
Turning on/off the power
When the recorder is not being used,
turn the power off to reduce battery
consumption to a minimum. Even if
the power is turned off, existing data,
mode settings, and clock settings will be
maintained.
turn the power off to reduce battery
consumption to a minimum. Even if
the power is turned off, existing data,
mode settings, and clock settings will be
maintained.
Turning on the power
While the recorder is turned off,
slide the POWER/HOLD switch to
the direction of the arrow.
slide the POWER/HOLD switch to
the direction of the arrow.
• The display will turn on, and the power
will be turned on.
Power save mode
If the recorder is on and stops for 10
minutes or longer (default), the display
shuts off and it goes into power save
mode (
minutes or longer (default), the display
shuts off and it goes into power save
mode (
☞ P.64).
• To exit power save mode, press any
button.
Turning off the power
Slide the POWER/HOLD switch to
the direction of the arrow, and hold
it for 0.5 seconds or longer.
the direction of the arrow, and hold
it for 0.5 seconds or longer.
• The display shuts off, and the power will
be turned off.
• The resume function remembers the stop
position before the power is turned off.
• When disposing rechargeable batteries,
always observe the local laws and
regulations. Contact your local recycling
center for proper disposal methods.
regulations. Contact your local recycling
center for proper disposal methods.
• If Ni-MH rechargeable batteries are not
fully discharged, protect against short-
circuiting (e.g. by taping the contacts)
before disposing.
circuiting (e.g. by taping the contacts)
before disposing.