HP (Hewlett-Packard) 3.1.X ユーザーズマニュアル

Switch Management

77

Beacon Button—Physically Locating a Switch in a Fabric

To physically locate a switch in a fabric, use the Beacon button as described in the 
following steps.

1. Launch Web Tools by entering the IP address of the switch you wish to locate. 

2. Highlight the switch in the Fabric Tree. 

The selected switch appears in the Switch View. 

3. Select the Beacon button on the switch View.

The LED lights on the selected switch light up and run back and forth across 
the switch. 

4. Look at the physical switches in your installation to locate the desired switch.