Martin Audio H3H+ ユーザーズマニュアル
Blackline H3H
+
Three-way bi-amp trapezoid Hybrid™
fully horn loaded
fully horn loaded
features
All-horn three-way system
‘Phase-ball’ loaded mid-driver
Hybrid™ LF section
Fitted with handles and castors
Horizontal format for low profile installs
Five year limited warranty
applications
Larger club performance
Large scale installs
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: info@martin-audio.com
All information is Copyright © 2007 Martin Audio Ltd.
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: info@martin-audio.com
All information is Copyright © 2007 Martin Audio Ltd.
The Blackline H3H+ is a very high performance, all-horn, three-
way system in a single, horizontally formatted, wide-bandwidth
package. New drivers have been developed for improved
performance in all bands. The Hybrid™ low frequency section
comprises a horn-loaded 15” (380mm)/4” (100mm) voice coil
driver that is reflex loaded to extend the LF output to below the
natural cut-off point of the horn. The new LF driver features a
water resistant cone and triple roll surround for increased
excursion.
way system in a single, horizontally formatted, wide-bandwidth
package. New drivers have been developed for improved
performance in all bands. The Hybrid™ low frequency section
comprises a horn-loaded 15” (380mm)/4” (100mm) voice coil
driver that is reflex loaded to extend the LF output to below the
natural cut-off point of the horn. The new LF driver features a
water resistant cone and triple roll surround for increased
excursion.
The mid-horn of the H3H+ has a unique ‘phase-ball’ loading
device which maintains the constant directivity characteristics of
the horn at the upper end of its range. It is driven by a new 10”
(250mm) midrange driver with an aluminium demodulating ring for
improved high-mid clarity and reduced distortion when driven
hard. The 70˚ x 40˚ HF section of the H3H+ features a
neodymium 1” (25mm) exit compression driver with a Kapton
diaphragm for high sensitivity and extended HF performance. The
internal mid/high passive crossover allows this three-way system
to be driven in a bi-amp configuration.
device which maintains the constant directivity characteristics of
the horn at the upper end of its range. It is driven by a new 10”
(250mm) midrange driver with an aluminium demodulating ring for
improved high-mid clarity and reduced distortion when driven
hard. The 70˚ x 40˚ HF section of the H3H+ features a
neodymium 1” (25mm) exit compression driver with a Kapton
diaphragm for high sensitivity and extended HF performance. The
internal mid/high passive crossover allows this three-way system
to be driven in a bi-amp configuration.
A Martin Audio M3+ or DX1 Electronic Controller is available to
provide H3H+ crossover and limiter facilities.
provide H3H+ crossover and limiter facilities.
www.martin-audio.com
overall dimensions
technical specifications
TYPE
Three-way bi-amp trapezoid Hybrid™
fully horn loaded
fully horn loaded
FREQUENCY RESPONSE (5)
50Hz-18kHz ± 3dB
DRIVERS
15” (380mm)/4” (100mm) voice coil bass driver
10” (250mm)/2.5” (63.5mm) voice coil mid driver
1” (25mm) exit HF compression driver
10” (250mm)/2.5” (63.5mm) voice coil mid driver
1” (25mm) exit HF compression driver
RATED POWER (2)
LF: 750W AES, 3000W peak
MF + HF: 300W AES, 1200W peak
MF + HF: 300W AES, 1200W peak
RECOMMENDED AMPLIFIER
LF: 400-1500W into 4 ohms
MF + HF: 400-800W into 4 ohms
MF + HF: 400-800W into 4 ohms
SENSITIVITY (6)
LF: 104dB, MF + HF: 104dB
MAXIMUM SPL (7)
131dB continuous, 137dB peak
NOMINAL IMPEDANCE
LF: 8 ohms, MF + HF: 8 ohms
DISPERSION (-6dB)
70˚ horizontal, 40˚ vertical
CROSSOVER
200Hz active, 2kHz passive
ENCLOSURE
250 litre, multi-laminate birch ply
FINISH
Textured black paint
PROTECTIVE GRILLE
Black perforated steel
CONNECTORS
2 x Neutrik NL4
PIN CONNECTIONS
LF+,- : 1+,1-
(MF + HF) +,- : 2+,2-
(MF + HF) +,- : 2+,2-
FITTINGS
12 x M10 inserts
4 x 4” (100mm) castors
4 x pocket handles
4 x 4” (100mm) castors
4 x pocket handles
DIMENSIONS (inc wheels)
(W) 1066mm x (H) 560mm x (D) 780mm (911mm)
(W) 42ins x (H) 22ins x (D) 30.7ins (35.9ins)
(W) 42ins x (H) 22ins x (D) 30.7ins (35.9ins)
WEIGHT
77.5kg (170.5lbs)
professional