EAW BH2312 ユーザーズマニュアル
P R
E L
I M
I N
A R
Y
• Low frequency array loudspeaker
• Three horn-loaded 12 inch woofers
• Beamwidth at upper frequency limit matches MQ2343D
• For permanent installation only
• Digital signal processor required for specified performance
• Three horn-loaded 12 inch woofers
• Beamwidth at upper frequency limit matches MQ2343D
• For permanent installation only
• Digital signal processor required for specified performance
The BH2312 uses three horn loaded 12 inch cones mounted in
a trapezoidal enclosure. Its frequency response has been opti-
mized for use as a dedicated low frequency system when used
with a companion MQ mid/high loudspeaker. Each 500 watt,
8 ohm driver has its own connections on the input panel. This
allows the drivers to be connected in parallel to one amplifi-
er channel or connected individually to separate amplifier
channels. The enclosure features a comprehensive system of
3/8-16 threaded suspension points.
a trapezoidal enclosure. Its frequency response has been opti-
mized for use as a dedicated low frequency system when used
with a companion MQ mid/high loudspeaker. Each 500 watt,
8 ohm driver has its own connections on the input panel. This
allows the drivers to be connected in parallel to one amplifi-
er channel or connected individually to separate amplifier
channels. The enclosure features a comprehensive system of
3/8-16 threaded suspension points.
The BH2312 is designed to work with the high “Q” MQ2343D
mid/high loudspeaker to create a full range audio system
capable of tremendous output. The three horn-loaded 12 inch
drivers provide maximum impact from 45 Hz to 300 Hz over
great distances. Use in multiples of three will optimize LF
response and smoothness. The BH2312 is also compatible
with any MQ2300 Series mid/high product.
mid/high loudspeaker to create a full range audio system
capable of tremendous output. The three horn-loaded 12 inch
drivers provide maximum impact from 45 Hz to 300 Hz over
great distances. Use in multiples of three will optimize LF
response and smoothness. The BH2312 is also compatible
with any MQ2300 Series mid/high product.
Frequency Response (Array of three BH2312)
±3 dB
55 Hz to 300 Hz
-10 dB
34 Hz
Axial Sensitivity (dB SPL, 1 W @ 1 m)
LF
112
Impedance (Ohms)
LF1/LF2/LF3
8/8/8
LF Paralleled
2.67
Power Handling, (Watts, continuous)
LF1/LF2/LF3
500/500/500
LF Paralleled
1500
Calculated Maximum Output (dB SPL)
LF Peak
149.8
LF Long Term
143.8
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal
120 @ 250 Hz
Vertical 1/2/3 boxes
80/32/22 @ 250 Hz
Recommended High-Pass Frequency
24 dB/Octave
45 Hz
SPECIFICATIONS BH2312
FEATURES
DESCRIPTION
PERFORMANCE
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
BH2312/2 pp
March 2003
Printed in USA
APPLICATION
PHYSICAL
Configuration Dedicated LF loudspeaker
LF Subsystem 3x 12 in woofers, horn loaded
Enclosure Material Exterior grade Baltic birch plywood
Finish Wear resistant textured black paint
Connectors 2x 6-contact barrier strip
Suspension Hardware 16x 3/8"-16 threaded mounting/
suspension points (4 each
top, bottom and sides)
top, bottom and sides)
Grille Powder coated perforated steel
Dimensions
inches
millimeters
Height 54.00
1372
Width (front) 32.00
813
Width (rear) 17.89
454
Depth 40.00
1016
Trapezoid Angle 10° per side
Weights
pounds
kilograms
Net Weight 310
140.9
Shipping Weight 335
152.3