Martin Audio W8L ユーザーズマニュアル
W8L Longbow
Large Scale, Three-Way Line Array Enclosure
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: info@martin-audio.com
All information is Copyright © 2008 Martin Audio Ltd.
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: info@martin-audio.com
All information is Copyright © 2008 Martin Audio Ltd.
www.martin-audio.com
1 of 5
touring and theatre
The Martin Audio W8L Longbow is an evolution of the successful W8L line array system. It brings a new level of
performance to the most demanding sound reinforcement applications such as outdoor festivals, sports stadiums
and the largest arenas.
performance to the most demanding sound reinforcement applications such as outdoor festivals, sports stadiums
and the largest arenas.
In the low frequency section, the 15” (380mm) Hybrid™ bass horn design is responsible for the tight, punchy and
extended low frequency performance of the W8L Longbow. Development of a completely new ultra-long excursion
driver gives the W8L Longbow the ability to displace almost twice the volume of air as the W8L when driven with
the same input signal. This advance lifts the already formidable low-end performance to a new level and extends the
low frequency -3dB point down to 35Hz.
extended low frequency performance of the W8L Longbow. Development of a completely new ultra-long excursion
driver gives the W8L Longbow the ability to displace almost twice the volume of air as the W8L when driven with
the same input signal. This advance lifts the already formidable low-end performance to a new level and extends the
low frequency -3dB point down to 35Hz.
The mid-horn of the W8L Longbow utilises 2 x 8” (200mm)/2” (50mm) coil drivers to produce 108dB at 1 metre
for a 1 watt input. The twin 8” (200mm) mid-horn geometry and short, toroidal ‘donut’ phase plug work together
to maintain a low curvature Wavefront and wide 90° horizontal coverage pattern of the mid frequencies right up the
2.5kHz crossover point.
for a 1 watt input. The twin 8” (200mm) mid-horn geometry and short, toroidal ‘donut’ phase plug work together
to maintain a low curvature Wavefront and wide 90° horizontal coverage pattern of the mid frequencies right up the
2.5kHz crossover point.
Since the launch of the W8L, Martin Audio has developed a patent pending technology, which provides an
exceptional degree of control over the curvature of the high frequency vertical wavefront. Our research has shown
that even very long throw systems benefit from a small but specific amount of wavefront curvature. By coupling this
technology with significant advances in high frequency device design we have created a quad-driver, high frequency
system with the very high efficiency of 119dB (1W/1m). This allows the W8L Longbow to cope with the most
adverse atmospheric conditions which can severely attenuate high frequencies over long distances. The new high
frequency system also results in improved HF summation of cabinets in the array and a corresponding reduction of
side lobes.
exceptional degree of control over the curvature of the high frequency vertical wavefront. Our research has shown
that even very long throw systems benefit from a small but specific amount of wavefront curvature. By coupling this
technology with significant advances in high frequency device design we have created a quad-driver, high frequency
system with the very high efficiency of 119dB (1W/1m). This allows the W8L Longbow to cope with the most
adverse atmospheric conditions which can severely attenuate high frequencies over long distances. The new high
frequency system also results in improved HF summation of cabinets in the array and a corresponding reduction of
side lobes.
The proprietary rigging system of the W8L Longbow is quick to deploy and allows a wide range of array curvatures
to be achieved as called up by the Display™ or Viewpoint™ array optimization software. W8L Longbow columns
are hinged at the front for gapfree HF coverage. Inter-cabinet angles from 0° to 7.5° are set by a rotating splay bar
at the rear of the enclosure.
to be achieved as called up by the Display™ or Viewpoint™ array optimization software. W8L Longbow columns
are hinged at the front for gapfree HF coverage. Inter-cabinet angles from 0° to 7.5° are set by a rotating splay bar
at the rear of the enclosure.
W8L Longbow systems are designed to be powered
by Martin Audio MA9.6K and MA4.2s amplifiers.
by Martin Audio MA9.6K and MA4.2s amplifiers.
features
Q
Large scale, three-way line array element
Q
Horn loaded 15" (380mm) LF – 106dB @1W, 1m (single cabinet)
Q
Twin 8" (200mm) mid-horn - 109dB @1W, 1m (single cabinet)
Q
Quad 1" (25mm) HF horn - 119dB @1W, 1m (single cabinet)
Q
Consistent 90º horizontal mid and HF pattern control
Q
Fast, integral rigging system with variable splay angles
Q
ViewPoint™ array optimisation software
Q
Factory controller presets for a wide variety of configurations
Q
Compatible with flown or ground stacked W8LS
Q
Compatible with ground stacked WLX, WSX, WS218X
applications
Q
Live Sound Reinforcement:
Outdoor concerts, stadiums and indoor arenas
Q
Fixed Installations