McIntosh XRT1K ユーザーズマニュアル

Thank You

Your decision to own this McIntosh XRT1K Loudspeaker

System ranks you at the very top among discriminating

music listeners. You now have “The Best.” The McIntosh

dedication to “Quality,” is assurance that you will receive

many years of listening enjoyment from this unit.

Please take a short time to read the information in this

manual. We want you to be as familiar as possible with all

the features and functions of your new McIntosh.

Please Take A Moment

The serial number, purchase date and McIntosh Dealer

name are important to you for possible insurance claim or

future service. The spaces below have been provided for

you to record that information:
Serial Number: __________________________________

Purchase Date: __________________________________

Dealer Name: ___________________________________

Technical Assistance

If at any time you have questions about your McIntosh

product, contact your McIntosh Dealer who is familiar

with your McIntosh equipment and any other brands that

may be part of your system. If you or your Dealer wish

additional help concerning a suspected problem, you can

receive technical assistance for all McIntosh products at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-1545

Fax: 607-724-0549

Customer Service

If it is determined that your McIntosh product is in need of

repair, you can return it to your Dealer. You can also return

it to the McIntosh Laboratory Service Department. For

assistance on factory repair return procedure, contact the

McIntosh Service Department at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-3515

Fax: 607-723-1917

Table of Contents

Safety Instructions ............................................................2

Thank You and Please Take a Moment .............................3

Technical Assistance and Customer Service ....................3

Table of Contents and General Information .....................3

Introduction .......................................................................4

Performance Features .......................................................5

Dimensions ....................................................................6-7

Installation ........................................................................8

How to Connect with one Amplifier ................................ 9

How to Connect using two Amplifiers .......................10-11

How to Connect using three Amplifiers .................... 12-13

Specifications .................................................................. 14

Packing Instruction .........................................................15

General Information

Caution: The XRT1K weight is 168 pounds (76.2kg). It re-

quires three or more persons to safely handle the Loudspeaker

System.

1. Loudspeaker Cables of adequate size are important to en-

sure that there will be no significant power loss or heating.

Cable size is specified in Gauge numbers or AWG (Ameri-

can Wire Gauge). The smaller the Gauge number, the larger

the wire size:

If the Loudspeaker Cables are 50 feet (38.1m) or less,

use at least 12 Gauge (AWG) wire size or larger.

If the Loudspeaker Cables are 100 feet (76.2m) or less,

use at least 10 Gauge (AWG) wire size or larger.

2. For additional connection information, refer to the owner’s

manual(s) for any component(s) connected to the XRT1K

Loudspeaker.

3. The XRT1K’s built-in speaker protection incorporates five

automatic resetting solid-state devices in the crossover

networks. One protects the tweeters, one for the midranges

and three for the woofers. The protection allows a certain

amount of overdrive but extended periods will trigger pro-

tection. If an obvious lack of high, mid or low frequencies

is noticed, the Protection Device may have activated. These

devices will automatically reset when the volume level is

reduced significantly and kept low until the output of the

affected Loudspeaker Element returns to normal.

4. When the XRT1K Loudspeaker System is driven by more

than one amplifier, the output levels of the different ampli-

fiers connected to the Loudspeaker System must be adjusted

to achieve a proper balance between the low, midrange

and high frequencies reproduced. This adjustment is best

achieved through the use of audio test equipment operated

by a qualified installer.