Omnitron Systems Technology KB-212 ユーザーズマニュアル

11038691_V_1_1

26/36

IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)
calculating working load limits, installation material being used, and periodic safety inspection of all
installation material and the speaker-system. If you lack these qualifications, do not attempt the installation
yourself, but instead use a professional structural rigger. Improper installation can result in bodily injury and
or damage to property.

The speaker-system has to be installed out of the reach of people.

Caution: Speaker-systems in hanging installations may cause severe injuries when crashing down! If you
have doubts concerning the safety of a possible installation, do NOT install the speaker-system!

Before rigging make sure that the installation area can hold a minimum point load of 10 times the speaker-
system's weight.

For overhead use, always install a safety-rope that can hold at least 12 times the weight of the fixture. You
must only use safety-ropes with quick link with screw cap. Pull the safety-rope through the attachment eyelet
on the speaker-system and over the trussing system or a safe fixation spot. Insert the end in the quick link
and tighten the safety screw.

The maximum drop distance must never exceed 20 cm.

A safety rope which already hold the strain of a crash or which is defective must not be used again.

Before taking into operation for the first time, the installation has to be approved by an expert!

This speaker-system must never be stacked - Danger to Life due to crashing speaker-systems!

This speaker-system may only be installed on the floor or appropriate stage elements etc.

Appropriate stage elements:
Stage element 100cm x 200cm, indoor 

No. 80702810

Stage element 100cm x 200cm, outdoor 

No. 80702812