TOA Electronics SR-A12L ユーザーガイド

16

• Check to confirm that the suspension wires, belts, construction of the

ceiling, etc are strong enough to withstand the speaker load.

• Tighten each joint bolt to 300-350 kg·cm of torque securely.Be sure to

use the joint bolts supplied with the speaker and the Rigging Frame.

• Up to 8 Line Array speakers can be arranged in flying configuration

per one Rigging Frame. The Subwoofer is counted as 1.5 pieces. No
more than 8 speakers can be arranged in flying configuration. 

• Fly the assembled system vertically from at least at

two points on the left and right sides. 

Center of 
gravity position

• Use a suspension point that provides the desired

downward angle. The downward angle increases
as the suspension point is moved backward. 

Anti-swing guy wires

• Add anti-swing guy wires as needed. Take care not

to apply the enclosure’s weight on the guy wires.