TOA Electronics SR-A12L ユーザーガイド

21

The lower Line Array speaker, excluding the subwoofer, can be tilted downward with the addition of SR-TP12
Tilt Joint Plates. SR-TP12 Tilt Joint Plates make it possible to set wider angles than can be achieved using the
supplied Joint Plates. Replace the lowermost Line Array speaker’s Joint Plates with the Tilt Joint Plates, then
assemble the system.

Joined view with sub-woofer
Tilt angle (Vertical facing angle) can be adjusted
in the range of 0 degree to 15 degrees.

Joined view with rigging frame
Tilt angle (Vertical facing angle) can be adjusted
in the range of 10 degrees to 15 degrees.

Tilt joint plate

Tilt joint plate

For assembling, refer to the previous “10-3. Mounting the Enclosure to the Rigging Frame” when joining to the
rigging frame, and “9 Flying, 9-4. Joining Enclosures” when joining to the sub-woofer.
For precautions when stacking, refer to the previous “10-5, Notes on Stacking”.

Tilt angle (Vertical facing angle) table

When using the supplied
joint plate

When using the optional tilt
joint plate

When joining the joint plate 
with rigging frame

When joining the joint plate 
with sub-woofer

0 – 5 degrees

in 1 degree units

Same as above

10 degrees – 15 degrees

in 1 degree units

0 degree – 15 degrees

in 1 degree units