Sony MZ-NHF800 ユーザーズマニュアル
55
Editing recorded tracks
Before editing
You can edit your recordings by adding/
erasing track marks or labeling tracks and
discs.
erasing track marks or labeling tracks and
discs.
•
When you edit the contents of a 1GB Hi-MD
disc, connect the AC power adaptor to the
recorder, charge the rechargeable battery fully
(battery level indication shows
disc, connect the AC power adaptor to the
recorder, charge the rechargeable battery fully
(battery level indication shows
), or use a
new alkaline dry battery (battery level
indication shows
indication shows
). When you attempt to
edit on a 1GB Hi-MD disc, “NotENOUGH
POWER TO EDIT” may appear and editing
cannot be done even if the battery level
indication shows sufficient remaining power
while the recorder is stopped or playing. This
is because of a mechanism that disables
editing when the remaining battery power is
estimated by the recorder to be insufficient
due to the high power consumption required
for 1GB Hi-MD disc editing.
POWER TO EDIT” may appear and editing
cannot be done even if the battery level
indication shows sufficient remaining power
while the recorder is stopped or playing. This
is because of a mechanism that disables
editing when the remaining battery power is
estimated by the recorder to be insufficient
due to the high power consumption required
for 1GB Hi-MD disc editing.
•
Before making an editing while using the AC
power adaptor, always insert a fully charged
rechargeable battery or a new alkaline dry
battery into the recorder first to ensure that the
editing operation completes successfully.
power adaptor, always insert a fully charged
rechargeable battery or a new alkaline dry
battery into the recorder first to ensure that the
editing operation completes successfully.
•
Premastered discs cannot be edited.
•
Close the record-protect tab on the side of the
disc before editing.
disc before editing.
•
Do not move or jog the recorder or disconnect
the power source while editing or “SYSTEM
FILE WRITING” is flashing in the display. If
you do, the data edited up to that point may
not be recorded to the disc, or data on the disc
may be damaged. “SYSTEM FILE
WRITING” flashes while the editing results
are being recorded.
the power source while editing or “SYSTEM
FILE WRITING” is flashing in the display. If
you do, the data edited up to that point may
not be recorded to the disc, or data on the disc
may be damaged. “SYSTEM FILE
WRITING” flashes while the editing results
are being recorded.
•
While “SYSTEM FILE WRITING” is
flashing, the lid becomes locked.
flashing, the lid becomes locked.
Adding titles (Title)
You can add titles to tracks, groups and
discs. You can add artist names and album
names to tracks on a disc used in Hi-MD
mode.
discs. You can add artist names and album
names to tracks on a disc used in Hi-MD
mode.
Available characters
•
Capital and small letters of the alphabet
for English and European languages
for English and European languages
•
Numbers 0 to 9
•
Symbols
1)
European alphabets appear only for discs used
in Hi-MD mode.
in Hi-MD mode.
2)
The available symbols will differ for Hi-MD
mode and MD mode (see “About the character
palette” (page 57)).
mode and MD mode (see “About the character
palette” (page 57)).
Maximum number of
characters per name
characters per name
Track names, group names, and disc
name: Approx. 200 each (containing a
mixture of all available characters)
name: Approx. 200 each (containing a
mixture of all available characters)
Maximum number of
characters that can be input
per disc
characters that can be input
per disc
In Hi-MD mode:
A maximum of about 55,000 characters
In MD mode:
A maximum of about 1,700 characters
A maximum of about 55,000 characters
In MD mode:
A maximum of about 1,700 characters
The number of titles that can be stored on
a disc depends on the number of
characters that are input for track names,
group names, artist names, album names
and disc name.
a disc depends on the number of
characters that are input for track names,
group names, artist names, album names
and disc name.
Notes