Philips AD7000W ユーザーズマニュアル

ページ / 26
22 EN
8 Troubleshooting
Warning
 
Never remove the casing of this apparatus.
To keep the warranty valid, never try 
to repair the system yourself. 
If you encounter problems when using this 
apparatus, check the following points before 
requesting service. If the problem remains 
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact Philips, 
ensure that the apparatus is nearby and the 
model number and serial number are available.
No power
 • Make sure that the AC power plug of 
the device is connected properly.
 • Make sure that there is power at the AC 
outlet.
 
No sound
 • Adjust the volume.
 • Check the Wi-Fi network connection. 
'Connect to your home Wi-Fi network for 
AirPlay' on page 8). 
 
No response from the unit
 • Press and hold   on AD7000W for more 
than 5 seconds to reset the device. Then 
again (see 'Connect to your home 
Wi-Fi network for AirPlay' on page 8).
 • Disconnect and reconnect the AC power 
plug, and then switch on the device again.
 
Wi-Fi network connection failed
 • Check if your Wi-Fi router is Wi-
Fi 802.11b/g certified. This device 
is only compatible with Wi-Fi 
802.11b/g certified routers.
 • If your Wi-Fi router is Wi-Fi 802.11n 
certified, make sure to enable the 
802.11b/g mode. AD7000W does not 
support connection to routers with 
802.11n only.
 • This device does not support the WPS-
PIN method.
 • If your Wi-Fi router supports WPS and the 
WPS-PBC method but fails to connect to 
method (see 'Scenario 2: Connect to a 
non-WPS router' on page 9).
 • Enable SSID broadcast on the Wi-Fi router.
 • Keep away from potential sources of 
interference which may affect Wi-Fi signal, 
such as microwave ovens.
 • If you fail to use your PC for Wi-Fi network 
setup, check whether your PC is using a 
Wi-Fi network. You cannot use Ethernet 
connection for AirPlay network setup.
 • Make sure that the SSID name of your 
home router consists of alphanumeric 
characters, with no space or special 
characters like %/#/* inserted.
 • If you choose to rename the AirPlay device 
'Philips_Fidelio XXXX' in the setting 
menu, do not use special characters or 
symbols.
 • For some new types of Wi-Fi routers, a 
network name (SSID) may be created 
automatically when you use WPS for 
connection. Always change the default 
network name (SSID) to a simple one that 
consists of alphanumerical characters, and 
also change the Wi-Fi security mode to 
secure your network.
 
Occasional breaking of AirPlay music 
streaming
Do one or all of the following:
 • Move AD7000W closer to 
your Wi-Fi router.