Panasonic KX-PRD262 ユーザーズマニュアル
Answering system for
landline
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting only” as the recording
time setting (page 56).
Important:
R Make sure the unit’s date and time setting
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting only” as the recording
time setting (page 56).
Important:
R Make sure the unit’s date and time setting
is correct (page 15).
Memory capacity (including your
greeting message)
greeting message)
The total recording capacity is about 18
minutes. A maximum of 64 messages can be
recorded.
Note:
R When message memory is full:
minutes. A maximum of 64 messages can be
recorded.
Note:
R When message memory is full:
– “Messages full” is shown briefly on
the handset display.
– The
indicator on the base unit
flashes quickly. (If there are new
messages recorded, the indicator
flashes slowly until you have listened to
the new messages.)
messages recorded, the indicator
flashes slowly until you have listened to
the new messages.)
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
announced to callers even though their
messages are not recorded.
Turning the answering
system on/off
1
To turn on:
MMENUN (right soft key) #327
To turn off:
MMENUN (right soft key) #328
MMENUN (right soft key) #327
To turn off:
MMENUN (right soft key) #328
2
MOFFN
Note:
R When the answering system is turned on,
R When the answering system is turned on,
–
is displayed on the handset.
–
indicator on the base unit lights up.
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Recording your greeting message
1
1
MMENUN (right soft key) #302
2
MbN: “Yes” a MSELECTN
3
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
4
Press MSTOPN to stop recording. a
MOFFN
MOFFN
Using a pre-recorded greeting
message
message
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
messages:
– If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers to
leave a message.
pre-recorded greeting asking callers to
leave a message.
– If the message recording time (page 56)
is set to “Greeting only”, callers’
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
Resetting to a pre-recorded greeting
message
message
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
message once you record your own greeting
message, you need to erase your own
greeting message.
For assistance, please visit http://www.panasonic.com/help
51
Answering System for Landline
PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 51
2014/01/09 11:59:43