Optimus CD-3840 ユーザーズマニュアル

12

5. The CD plays to the end, then play

stops. You can press 

 once to stop play sooner. 

6. Be sure the CD has stopped spin-

ning, then slide 

 in the direc-

tion of the arrow to open the disc
compartment. Hold the edge of the
disc and gently press the center
hub, then remove the disc.

When the CD player is stopped for
about 30 seconds, the power automati-
cally turns off. To turn it off sooner,
press 

 again.

Your CD player contains special circuits
to overcome skipping problems caused
by shock or vibration. This means you
can listen to the CD player anywhere
you go or use it in your vehicle. 

When you turn on the anti-shock sys-
tem, the CD player continuously saves
the next 40 seconds of music in memo-
ry. During a shock or vibration that
would normally make a track skip or
pause, the CD player plays directly from
memory. If the player is subjected to
shocks of over 40 seconds duration,

some interruption of sound output will
occur. This is normal. The sound re-
sumes once the shock subsides.

To turn on the anti-shock system, press

. If a CD is playing, the

sound mutes for about 1 second, then

 appears.

To turn off the anti-shock system, press

 again. The sound briefly

stops and 

 disappears.

Note:  While the SAS system provides
for continuous sound output when the
CD player is subjected to shock or vi-
bration, it will not correct errors arising
from the use of defective, scratched or
dirty discs.

Press 

 during play to

go to the beginning of the next track,

 

 to return to the be-

ginning of the current track, or 

to return to the be-

ginning of the previous track.

42-5098.fm  Page 12  Wednesday, January 19, 2000  4:03 PM