Honeywell MRP-2001 ユーザーズマニュアル

Product Description

16

MRP-2001 & MRP-2001E   PN 53040:A  4/16/2007

The CAC-5X Module can be used to convert the Style B (Class B) Initiating Device Circuits to 
Style D (Class A) and Style Y (Class B) Output Circuits to Style Z (Class A).  The modules connect 
to J2 and J7 on the FACP main circuit board. Note that two Class A Converter modules are required 
to convert all six Output Circuits and four Initiating Device Circuits.

The 4XTMF provides a supervised output for local energy municipal box transmitter and alarm and 
trouble reverse polarity.  It includes a disable switch and disable trouble LED.  A module jumper 
option allows the reverse polarity circuit to open with a system trouble condition if no alarm 
condition exists.  The 4XTMF mounts to the main circuit board connectors J4 & J5.

The ANN-80 is a remote LCD annunciator that mimics the information displayed on the FACP 
LCD display.

The ANN-LED Annunciator Module provides three LEDs for each zone: Alarm, Trouble and 
Supervisory.

The ANN-RLY Module, which can be mounted inside the cabinet, provides 10 Form-C relays.

The ANN-S/PG

 module provides a connection for a serial or parallel printer.

The ANN-I/O module provides connections to a user supplied graphic annunciator.

A dress panel DP-51050 (red) is available as an option.  The dress panel restricts access to the 
system wiring while allowing access to the membrane switch panel.

A DP-51050LED dress panel is provided standard only with Canadian versions of the FACP.  The 
dress panel restricts access to the system wiring while allowing access to the membrane switch 
panel.  It also allows the installation of an optional ANN-LED annunciator module.

A trim-ring TR-CE (red) is available as an option.  The trim-ring allows semi-flush mounting of the 
cabinet.

The BB-26 or BB-55 battery box may be used to house two batteries greater than 18 Amp Hour.  
The battery box mounts directly below the control panel cabinet, centered to the main circuit board.