Motorola GP68 ユーザーズマニュアル

21

If a subscriber primarily has only radio dispatch/fleet
requirements, both the Primary Code and the Second-
ary Codes may be assigned to group Paging Codes.
When programmed in this manner, the equipment will
respond to two groups (Group and Sub-Group).  The
operator of this equipment can only receive Group or
Sub-Group calls.  An individual user in the subscriber
group can make individual outgoing calls to the landline
(Primary Code is used).

Table 2-1 illustrates a possible programming/activation scenario.  The first three
subscribers are individual subscribers using half duplex type equipment.  These
paging codes will be programmed into only one piece of subscriber equipment in
the Primary Code position.  The fourth and fifth entries are group subscribers.  The
group paging code may be programmed into many pieces of subscriber equipment
as Primary Code or Secondary Code (Group/Sub-Group).

Table 2-2 depicts how four pieces of user equipment may be programmed
related to Table 2-1.

will operate as an individual user.

will operate as an individual and be
grouped with #4.

will operate as an individual, with
grouping to #4 but NOT grouped with
#2.

operates with two groups.  Thereby
being associated with #2 and #3.

Subscriber

Type

Paging Code

ID Number

10000

half

4100

10001

half

4101

10003

half

4102

90000

group

4103

90001

group

4104

Table 2-1 • ST-852M Programming