Blomberg DV 17540 NBL00 ユーザーズマニュアル

18 - EN

1. Press the “Start/Pause/Cancel” button to 

start the program.

2. The Start/Pause/Cancel button will light up 

to indicate that the program has started.

Progress of a running program is shown 

through the program follow-up indicator.

At the beginning of each program step, the 

related lamp will light up and the lamp of the 

completed step will turn off.

- Drying level will be illuminated during the 

whole drying process until the dryness 

reaches “Damp Dry / Ready to Iron”.

- Lamp lights when the dryer reaches the 

“Damp Dry / Ready to Iron” step and remains 

lit until the next step.

- Lamp lights when the dryer reaches the 

“Regular Dry / Ready to Wear” step and 

remains lit until the next step.

- The lamp lights when the program comes 

to an end and the anti-creasing function is 

activated.

C

 If more than one lamp lights or flashes 

constantly, it means that there is a malfunction 

or a failure (Please see Troubleshooting).

Press and hold the Start/Pause/Cancel button 

for around 3 seconds to Cancel the program  

currently running.

Select another program by rotating the 

program knob.

Press the “Start/Pause/Cancel” button again 

to start the new program.

C

 The program which is selected first will 

go on even if the program selector knob 

is moved and another program is selected 

while the dryer is operating. You must cancel 

the current program to change the drying 

program.

A

  As the inside of the dryer will be 

excessively hot when you cancel the program 

when the dryer is running, activate the 

ventilation program to cool it down.

A

 If the dryer is stopped during any drying 

program, and if the position of the program 

selector knob is changed, a tone will be heard 

(if the Cancel Audio Warning function is not 

selected). The dryer will not start even if the 

Start/Pause/Cancel button is pressed, unless 

the program selector knob is returned to the 

initial program. The paused program must 

be cancelled in order to change the drying 

program.

In order to add or take out laundry after the 

start of the program;

1. Press the Start/Pause/Cancel button to 

switch the dryer to Pause mode. the drying 

process will stop.

2. Open the door at the Pause position 

and close it again after adding or taking out 

laundry.

3. Press the “Start/Pause/Cancel” button to 

restart the program.

C 

 Laundry may be added or taken out 

during a drying process, but  interrupting 

drying continuously will extend the program's 

time and increase energy consumption. 

Therefore, it is recommended to add all 

laundry before the drying program is started.

Your dryer will send out a tone when the 

program comes to an end. If you do not want 

to hear this, you need to press the Cancel 

Signal button.  The relevant lamp will light 

when this button is pressed and the tone will 

not activate when the program ends.

C

 You can select this function either before or 

after the program starts. 

There is a childproof lock to prevent any 

program interruption due to the pressing of 

keys while a program is running. The loading 

door and all buttons  except the “On/Off” key 

on the panel are deactivated when the child-

proof lock is active.

In order to activate the childproof lock, pres 

the Start/Pause/Cancel and Cancel Audio 

Warning buttons at the same time for 3 

seconds. 

To start a new program after the program 

ends or to stop a program, the childproof