Beko DRCS 68 W ユーザーズマニュアル

17 - EN

Your machine will send out an audio 

warning when the programme comes to 

an end. If you do not want to hear this 

buzzing, you need to press the “Cancel 

Audio Warning” button. The relevant LED 

will light up when this button is pressed 

and an audio warning will not be given 

when the programme comes to an end.

C

 You can select this function either 

before or after the programme starts. 

C

 Warning indicators may differ 

according to the model of your 

machine.

A warning LED will light up to remind filter 

cleaning after the programme finishes.

C

 If the filter cleaning warning LED 

lights up continuously, please refer to, 

“Solution suggestions for problems”.

A warning LED will light up at the end of 

the programme or when the tank is full 

with water. The machine stops operating 

when this warning LED lights up during 

a programme running. To restart the 

machine, please drain the water in the 

water tank. Press “Start/Pause/Cancel” 

button to start the programme after 

you have emptied the water tank. The 

warning LED goes off and the programme 

resumes operating.

1. Press “Start/Pause/Cancel” button to 

start the programme.

2. “Start/Pause/Cancel” button will light 

up to indicate that the programme has 

started.

Progress of a running programme is 

shown through the programme follow-up 

indicator.

At the beginning of every programme 

step, the relevant indicator LED will light 

up and light of the completed step will 

turn off.

- Drying level will be illuminated during 

the whole drying process until the drying 

degree reaches “ Ready to Iron “.

- Starts to illuminate when the drying 

degree reaches “ Ready to Iron “ step and 

remains illuminated until the next step.

- Starts to illuminate when the drying 

degree reaches “ Ready to wear “ step 

and remains illuminated until the next 

step.

- Illuminates when the programme comes 

to an end and anti-creasing function is 

activated.

C

 If more than one LED light up or 

flash concurrently, it means there is 

malfunctioning or a failure (please see, 

Solution suggestions for problems).

You can use this feature after your machine 

has started to dry your clothes under higher 

or lower temperatures.

For example;

Press and hold the “Start/Pause/Cancel” 

button for about 3 seconds to “Cancel” 

the programme in order to select “Extra 

Dry” programme instead of “Iron Dry” 

programme. 

Select the “Extra Dry” programme by 

rotating the programme knob.

Press “Start/Pause/Cancel” button to start 

the programme.

C

 The programme which is selected first will 

go on even if the programme selection 

button is moved and another programme 

mode is selected while the machine is 

operating. You must cancel the ongoing 

programme in order to change the drying 

programme. (See, Ending the program 

through canceling)