Beko DRVS 73S ユーザーズマニュアル

22

EN

Lint and fibres released from the laundry 

to the air during the drying cycle are 

collected in the “Fluff Filter”. 

C 

Such fibre and lint are generally 

formed during wearing and washing.

C 

Always clean the filter after each 

Drying process.

C 

You can clean the filter and filter area 

by vacuum cleaner.

For Filter cleaning;

1. Open the cover

2. Remove the fluff filter by pulling it up 

and open the filter.

3. Clean lint, fibre, and the fluff by hand or 

with a soft piece of cloth.

4. Close the filter and place it back into its 

seat. 

C 

Clogging may arise on the filter 

surface after using your machine for 

some time; if this occurs, wash the 

filter with water and dry it before using 

again.

There are humidity sensors in your 

machine that detect whether the laundry 

is dry or not.

For sensor cleaning;

1  Open the cover of your machine.

2  Allow the machine to cool off if drying 

has been carried out.

3  Wipe the metal sensors with a soft 

cloth, dampened with vinegar and dry 

them.

C

 Clean metal sensors 4 times a year.

A

Never use solvents, cleaning agents 

or substances alike when cleaning as 

these might cause fire and explosion!