Whirlpool W10385093A - SP マニュアル

Replace inlet hose and hose screen after 5 years of use 

to reduce the risk of hose failure. Periodically inspect and 

replace inlet hose if bulges, kinks, cuts, wear, or leaks  

are found.

When replacing your inlet hose, record the date  

of replacement.

1.  Unplug dryer or disconnect power.
2.  Shut off water faucet.
3.  Disconnect water inlet hose from faucet and drain.

1.  Flush water pipes. Reconnect water inlet hose to faucet.  

Turn on water faucet.

2.  Plug in dryer or reconnect power as described in the 

“Installation Instructions.”

The dryer light automatically turns on inside the dryer drum 

when you open the door.

1.  Unplug dryer or disconnect power.
2.  Open the dryer door. Locate the light 

bulb cover on the back wall of the dryer. 

Remove the screw located in the lower 

right corner of the cover. Remove the 

cover.

3.  Turn bulb counterclockwise. Replace 

the bulb with a 10-watt appliance bulb only.  

Replace the cover and secure with the screw.

4.  Plug in dryer or reconnect power.