Whirlpool W10240583C-SP ユーザーズマニュアル
18
LEvEL DRYER
level Dryer
1.
Place
level here
Not Level
lEVEl Not Level
Check levelness of dryer from side to side. Repeat from
front to back.
noTE: The dryer must be level for the moisture sensing system
to operate correctly.
move dryer to final location
2.
Move dryer to final location. Avoid crushing or kinking vent.
After dryer is in place, remove cardboard from under dryer.
Turn on cold water faucet
Check that the water faucets are turned on.
Check for leaks
Check for leaks around “Y” connector, faucets, and hoses.
6.
7.
CONNECT vENT
1.
Connect vent to exhaust outlet
Using a 4" (102 mm) clamp, connect vent to exhaust outlet
in dryer. If connecting to existing vent, make sure vent is
clean. Dryer vent must fit over dryer exhaust outlet and inside
exhaust hood. Check that vent is secured to exhaust hood
with a 4" (102 mm) clamp.