Haier CGDE700AW ユーザーズマニュアル

1. This appliance must be properly grounded. Electrical shock can result if the 

dryer is not properly grounded. Follow the instructions in this manual for 
proper grounding.

2. Do not use an extension cord with this dryer. Some extension cords are not 

designed to withstand the amounts of electrical current this dryer utilizes and 
can melt, creating electric shock and/or fire hazard. Locate the dryer within 
reach of the receptacle for the length power cord to be purchased, allowing 
some slack in the cord. Refer to the electrical requirements in this manual for 
the proper power cord to be purchased.

3. A UL approved strain relief must be installed onto power cord. If the strain 

relief is not attached, the cord can be pulled out of the pulled out of the 
dryer and can be cut by any movement of the cord, resulting in electrical 
shock.

4. Do not use an aluminum wire receptacle with copper wired power cord and 

plug (or vice versa ). A chemical reaction occurs between copper and 
aluminum and can cause electrical shorts. The proper wiring and receptacle 
is a copper wired power cord with a copper wired receptacle.

: Dryers operating on 208 Volt power supply sill have longer drying times

than operation on 240 Volt power supply.

Danger: Improper connection of the equipment grounding conductor can

result in a risk of electrical shock. Check with a licensed 
electrician if you are in doubt as to whether the appliance is
properly grounded.