Haier CGDE700AW ユーザーズマニュアル

1.  Press any button except "Off" button to power on.

2.  Press "Timed-Dry Cycles" button and select "Rack Dry" cycle.

• After powering on, press "Timed-Dry Cycle" button to select "Rack Dry" 

program.

3.  Press "More Time" And "Less Time" buttons to set a suitable time.

• After setting "Timed-Dry Cycle" to "Rack Dry", you can press these two 

buttons to increase or decrease drying time as you desire.

4-7.Press buttons "Temp", "Signal", "Wrinkle saver", and "Touch Up" to define 

your desired program.

Notes: For "Rack Dry" program, use of buttons "Temp", "Signal", "wrinkle Saver"

and "Touch up" is the same as for auto-programs. "Sensor Dry Level" is
here inactive, pressing of which will get alarms.

8.  Press "Start/Pause" button.

Your dryer also has the following features for your convenience:

Lint Filter:

• All dryers come with a lint filter that needs to be cleaned before or after every

use (read “Care and Cleaning Guide” Section).

Leveling Legs:

• Your dryer has four leveling legs which are located in the front and rear cor-

ners of your dryer. After installing your dryer in its final position, you can level
your dryer.

• Leveling legs can be adjusted by turning them clockwise to raise your dryer or

by turning them counterclockwise to lower your dryer.