Hoover VHV 781C ユーザーズマニュアル
EN
8
CONTROLS AND INDICATORS
Programme Selector – Select the required programme
Time Selection Button – Allows the user to change duration of the program selected by
Programme Selector. It can be used only with the selection of: Mix&Dry, Shirts and Time Programs
Delay Start Button – Allows the user to delay the start of the drying cycle (see details of
Operation )
Acrylic Synthetic Button – Press to select the type of fabrics to dry Acrylic and Synthetics, when
pressed Acrylic Synthetics option is activated and the indicator lights up.
Anti- Crease Button – Allows the user to select a post drying anti-crease cycle.
Start/Pause Button – Press to commence/ to pause the selected drying programme.
Memo Button – Allows user to record the program by pressing simultaneously the Anti-
Crease and the Acrylic Synthetic buttons for 3 seconds, after 2 minutes duration of the chosen
program/option
Filter Care indicator – lights when the filter needs cleaning
Program Display – Related indicator lights when a auto program has been selected.
Refresh – The indicator lights up when the program starts the cool down stage.
Time Selection Button – Allows the user to change duration of the program selected by
Programme Selector. It can be used only with the selection of: Mix&Dry, Shirts and Time Programs
Delay Start Button – Allows the user to delay the start of the drying cycle (see details of
Operation )
Acrylic Synthetic Button – Press to select the type of fabrics to dry Acrylic and Synthetics, when
pressed Acrylic Synthetics option is activated and the indicator lights up.
Anti- Crease Button – Allows the user to select a post drying anti-crease cycle.
Start/Pause Button – Press to commence/ to pause the selected drying programme.
Memo Button – Allows user to record the program by pressing simultaneously the Anti-
Crease and the Acrylic Synthetic buttons for 3 seconds, after 2 minutes duration of the chosen
program/option
Filter Care indicator – lights when the filter needs cleaning
Program Display – Related indicator lights when a auto program has been selected.
Refresh – The indicator lights up when the program starts the cool down stage.
Control Panel and Indicator Lights
Time Selection
Button
Programme
Selector
Acrylic Synthetic
Button
Anti-Crease
Button
Filter Care
Indicator
Program
Display
SELECTING THE PROGRAMME
The Sensor Dry machine gives many options for drying the laundry
to suit all circumstances. The table on the next page lists the
programmes and the function of each programme.
Note:
The sensor may not detect a small load of small articles. For small
loads and separate items or pre-dried fabrics with low moisture
content, use the timed programmes.
If the sensor does not detect the item the dryer will only operate for
10 minutes before going into cooldown.
If the load is too large or too wet to tumble dry the dryer will
automatically go into cooldown after approximately 3 hours.
In these cases we advise to use a time cycles between 30 and
75minutes depending on the load size and dryness required, and
select high or low heat depending upon the fabric type.
to suit all circumstances. The table on the next page lists the
programmes and the function of each programme.
Note:
The sensor may not detect a small load of small articles. For small
loads and separate items or pre-dried fabrics with low moisture
content, use the timed programmes.
If the sensor does not detect the item the dryer will only operate for
10 minutes before going into cooldown.
If the load is too large or too wet to tumble dry the dryer will
automatically go into cooldown after approximately 3 hours.
In these cases we advise to use a time cycles between 30 and
75minutes depending on the load size and dryness required, and
select high or low heat depending upon the fabric type.
Start/Pause
Button
Delay Start
Button