Hoover VTV 580NC ユーザーズマニュアル

ページ / 14
VENTILATION
It is essential to use a venting hose to carry the hot moist air away from the dryer unless the dryer is 
situated in a open space with a good air flowaround it. Recirculation of the moist air will prevent the 
efficient operation of the dryer.
The hose is assembled to the machine as shown. The hose may be fitted through a wall or through 
an open door or window. The hose is 110mm in diameter and will extend 1.8 meters.
The  following  guidelines  should  be  followed  when  installing  the 
discharge hose.
●  Do not use two hoses joined together as the drying performance will 
be reduced.
●  Do not restrict the flow of air through the hose e.g. by kinking it or fitting 
a smaller diameter connector to mount to a wall opening.
●  Avoid the hose making U shaped curves as this will restrict the flow of 
air and increase the chance that water will collect in the hose.
●  Check the hose regularly to remove any build-up of fluff or water that 
may have collected in it.
The following diagrams give examples of good and bad installations.
Installation of the Discharge Hose
H max  
20 inches
(50.80cm)
PREPARING THE LOAD
Before using the tumble dryer for the first time:
● Please read this instruction book thoroughly.
● Remove all items packed inside drum.
● Wipe the inside of the drum and door with a damp cloth   to remove any dust which may have 
settled in transit.
Make sure that the laundry you are going to dry is suitable for drying in a tumble dryer, as shown by 
the care symbols on each item.
Check that all fastenings are closed and that pockets are empty. Turn the articles inside out. Place 
clothes loosely in the drum to make sure that they don't get tangled.
Clothes Preparation
EN
6