Frigidaire FFSG5115PW オーナーマニュアル

8

•  Load items loosely. The average wet load will 

fi ll the drum 1/3 to 1/2 full. Items need room to 

tumble freely for even drying and less wrinkling.

•  If desired, place a dryer fabric softener sheet on 

top of the load at the beginning of the cycle.

•  To save energy and time and avoid uneven drying 

and wrinkling, do not overload the dryer.

•  When drying large items, dry only two or three 

items at a time. Fill out the load with small and 

medium sized items.

•  For delicate or very small loads, add two or three 

similar items to improve tumbling action.

•  Adjustments made to a cycle will be remembered  

and recalled each time that cycle is selected in the 

future.

•  Turn the cycle selector knob in either direction to 

select the cycle desired. The indicator for that cycle 

will be illuminated.

•  The estimated drying time for Auto Dry cycles or 

the actual drying time for Timed Dry cycles will be 

displayed.

•  A suitable drying temperature, dryness level and 

options will automatically be indicated for the cycle se-

lected. See the “Dryer Settings Chart” for more details.

•  To change the drying temperature and dryness 

level, press the temp or dry level buttons to scroll 

to the desired settings.

•  To select or delete an option, press the button for 

that option. The indicator will be illuminated when 

the option has been selected. The indicator will no 

longer be lighted when the option has been deleted.

•  Close the door and press START to begin the 

cycle. The dryer will not operate with the door 

open. To interrupt the cycle, press pause; press 

START to resume the cycle. Press cancel to stop 

the cycle.

•  If changes to the cycle, temperature, dryness level 

or options are attempted after the cycle starts, the 

lights will blink and a signal will beep.

•  To change the cycle once the cycle has begun, 

press cancel and select a new cycle. To change 

the temperature, dryness level or options once the 

cycle has begun, press pause and make the new 

selections.

•  To add or remove items when the dryer is running, 

open the door. The dryer will stop when the door 

is opened. Allow the drum to come to a complete 

stop before reaching inside.

•  Close the door and press START to resume the cycle.

•  A signal will sound at the end of the cycle if the 

chime option has been selected.

To return to factory 

settings, press these 

two buttons at the 

same time and 

hold until the signal 

sounds.

Clean the lint fi lter after every load. 

CLEAN FILTER

 

will be displayed at the end of the cycle to remind you 

to remove lint from the fi lter.

Do not operate dryer without 

lint fi lter in place.

If drying a single large or bulky item, such as a 

comforter, remove the item part way through the cycle 

and turn it “inside out” to maximize drying effectiveness. 

Place item back in dryer and re-start cycle.

If a setting is not available for the cycle selected, the 

indicator will not light.

Over-drying can cause wrinkles, shrinkage, lint, 

harshness and a build up of static electricity.