Electrolux EWMED65H ユーザーズマニュアル

ページ / 26
3
Safety
Important Safety Instructions
Recognize safety symbols, words and 
labels
Safety items throughout this manual are labeled 
with a WARNING or CAUTION based on the risk
type as described below:
Read all of the following instructions before 
installing and using this appliance:
Destroy the carton and plastic bags after the dryer 
is unpacked. Children might use them for play. 
Cartons covered with rugs, bedspreads, or plastic 
sheets can become airtight chambers causing suf-
focation. Place all materials in a garbage container
or make materials inaccessible to children.
Clothes dryer installation and service must be 
performed by a qualified installer, service agency 
or the gas supplier.
Install the clothes dryer according to the manu-
facturer’s instructions and local codes.
The electrical service to the dryer must conform 
with local codes and ordinances and the latest 
edition of the National Electrical Code, ANSI/
NFPA 70, or in Canada, the Canadian electrical
code C22.1 part 1.
The gas service to the dryer must conform with 
local codes and ordinances and the latest edi-
tion of the National Fuel Gas Code ANSI Z223.1,
or in Canada, CAN/ACG B149.1-2000.
The dryer is designed under ANSI Z 21.5.1 or
ANSI/UL 2158 - CAN/CSA C22.2 No. 112 (latest
editions) for HOME USE only. This dryer is not
recommended for commercial applications such 
as restaurants, beauty salons, etc.
The instructions in this manual and all other 
literature included with this dryer are not meant 
to cover every possible condition and situation 
that may occur. Good safe practice and caution
MUST be applied when installing, operating and
maintaining any appliance.
WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch; do not use 
any phone in your building.
Clear the room, building or area of all occupants.
Immediately call your gas supplier from a neigh-
bor’s phone. Follow the gas supplier’s instruc-
tions.
If you cannot reach your gas supplier, call the fire 
department.
Save these instructions for future 
reference.
This symbol alerts you to situa-
tions that may cause serious body 
harm, death or property damage.
This symbol alerts you to situa-
tions that may cause bodily injury
or property damage.
       WARNING
For your safety the information in this manual 
must be followed to minimize the risk of fire 
or explosion or to prevent property damage,
personal injury or loss of life. Do not store or use 
gasoline or other flammable vapors and liquids in 
the vicinity of this or any other appliance.
Pre-installation requirements
Adjustable
pliers
4 inch, rigid metal or
semi-rigid metal exhaust duct work
4 i h i id
t l
Adjustable
wrench
Metal foil tape
(not duct tape)
External
vent hood
or
Carpenter’s level
Phillips, straight, &
square bit screwdrivers
Universal wrench
supplied with
matching washer
Pipe wrench
for gas
supply
gas line
shutoff valve
(gas dryer)
or
LP-resistant
thread tape
(for natural gas 
or LP supply)
½” NPT union flare
adapters (x2) and
flexible gas supply line
(gas dryer)
3-wire or 4-wire
240 volt cord kit
(electric dryer)
4 in.
(10.2 cm)
clamp
Tools and materials needed for installation: