Electrolux 137382100 A (1106) インストール手順
23
Reversing Door
L) Reattaching Door Assembly
1 Open the hinge to a 90 degree angle.
2 Install the door onto the hinge locating pins.
3 Secure the door with 4 long, course-thread,
counter-sunk screws.
4 Close the door and test the operation of the
latch.
Reattaching door and hardware
3 Rotate and move trim ring cover plate to
opposite opening in trim and reinsert.
M) Reversing Trim Ring
1 Trim ring orientation is marked on the back.
2 Remove trim ring cover plate. To remove
plate from left, pivot point is down. To
remove plate from right, pivot point is up.
remove plate from right, pivot point is up.
UP
N) Reinstalling Trim Ring
1 Close
door.
2 Orient trim so UP position is approximately
¾” to the left of top center. Opening in ring
should be on the hinge side.
should be on the hinge side.
3 Insert trim ring in slots and rotate clockwise
approximately ¾”.
O) Reinstalling Trim Plug
1 Open door to 90 degree angle.
2 Install trim plug with 1 long, course-thread,
panhead screw.
P) Plug in dryer and continue operation.