Frigidaire 137135100B ユーザーズマニュアル

13

Grounding type

Grounding type
wa

wall receptacl

ll receptacle

Po

Power cord with

wer cord with

3-prong 

3-prong  gr

grounded plug

ounded plug

Connect the exhaust duct to the outside exhaust system 

1. 

(see pages 4 through 6). Use of a 4” (10.2 cm) clamp (item 
A) is recommended to connect the dryer to the exhaust 
vent system. Use metal foil tape to seal all other joints. 
Carefully slide the dryer to its fi nal position.  Adjust one or 

2. 

more of the legs until the dryer is resting solidly on all four 
legs. Place a level on top of the dryer. The dryer MUST be 
level and resting solidly on all four legs. Rock alternating 
corners to check for stability. Remove and discard door 
tape.

Plug the power cord into a grounded outlet.

3. 

Turn on the power at the circuit breaker/fuse box.

4. 

Read the

5. 

 Use & Care Guide provided with the dryer. It 

contains valuable and helpful information that will save 
you time and money.
If you have any questions during initial operation, please 

6. 

review the “Avoid Service Checklist” in your Use & Care 
Guide before calling for service.
Place these instructions in a location near the dryer for 

7. 

future reference.

 Be sure the power is off at a circuit breaker/

fuse box before plugging the power cord into an outlet.

 A wiring diagram and technical data sheet are 

located inside the dryer console.