Olympus 50 ユーザーズマニュアル

 

Since the Fantasea FFL 50 Flash Housing was specifically designed for the Olympus FL50 Speedlight, 

insertion is a simple matter of placing the flash into the housing. Make sure the flash is properly aligned and 

that it sits perfectly flat. There are no screws or mounts to worry about or any other alignments once the 

flash is properly inserted. 

Set the flashlight in an upright position. Slide the flashlight all the way into the hot shoe of the housing until 

it stops  

Notes: 

 

2.  Once this is determined, insert both into their respective 

housings. 

 

Turn the lock ring follow the direction “LOCK”. Take care not to excessively tighten the screw. Note: If 

you find that control levers do not locate properly with the buttons, please check again that the flashlight is 

properly seated to the limit of the guide rail.   

 
 

 

 

11