Olympus 260116 ユーザーズマニュアル

EN

Select the flash control mode according to the subject and the shooting 
conditions. Press the MODE button repeatedly to change the flash 
control mode.

The flash light intensity is 
controlled automatically 
according to the camera’s setup. 
The flash will be adjusted based 
on the brightness taken through 
the camera’s lens.

Usually use this 
mode with a camera 
with communication 
capability.

P. 12

The flash light intensity is 
controlled automatically 
according to the camera’s setup. 
The flash will be adjusted based 
on the brightness captured 
by auto light receptor on the 
electronic flash.

If the camera has 
communication 
capability, this mode 
can be used only 
when the camera 
is an AUTO-
compatible model.

P. 16

In this mode, the flash is emitted 
according to the guide number 
setting.

Shooting using 
manual flash.

P. 17

Super FP flash. This mode allows 
you to use flash photography 
even at shutter speeds faster 
than the flash synchronization 
speed of the camera. In AUTO 
mode the flash light intensity 
is controlled automatically. In 
MANUAL mode the flash is 
emitted according to the guide 
number selected.

Outdoor shooting 
using flash, such as 
fill-in flash shooting 
in the daytime.

P. 18,
20

x

 Certain modes may be unavailable depending on the shooting mode set 

on the camera and the functions of the camera in use.

 It is not possible to select an unavailable mode.

e00_r2062_cs2j.indb   13

e00_r2062_cs2j.indb   13

2007/08/01   14:43:57

2007/08/01   14:43:57