Olympus 260116 ユーザーズマニュアル
31
EN
Setup mode
Mode display
Value
display
Function
Default
value
Dial A
Dial B
Firing angle
(ZOOM)
display
(ZOOM)
display
Firing angle is
displayed in terms of
the lens focal length
of a FOUR THIRDS
camera.
displayed in terms of
the lens focal length
of a FOUR THIRDS
camera.
4-3
Firing angle is
converted into the
focal distance of the
135 type.
This allows the flash
to be used in the
same feeling as the
flash for a 135 type
(35 mm film) camera.
converted into the
focal distance of the
135 type.
This allows the flash
to be used in the
same feeling as the
flash for a 135 type
(35 mm film) camera.
Distance display
unit
unit
Distance is
displayed in meter.
displayed in meter.
m
Distance is
displayed in feet.
displayed in feet.
Flash intensity
control
control
Flash intensity
cannot be adjusted.
cannot be adjusted.
OFF
Flash intensity can
be adjusted.
be adjusted.
Wide panel
switch disabling
switch disabling
The wide panel
switch is activated.
Use this setting to
detect that the wide
panel has been
slid out.
switch is activated.
Use this setting to
detect that the wide
panel has been
slid out.
on
The wide panel
switch is deactivated.
Use this setting
when the wide panel
is damaged so as to
be able to change
the firing angle with
the ZOOM button.
switch is deactivated.
Use this setting
when the wide panel
is damaged so as to
be able to change
the firing angle with
the ZOOM button.
ISO, F
communication
in AUTO mode
communication
in AUTO mode
Available
only in AUTO
mode, with
cameras with
communication
capability.
mode, with
cameras with
communication
capability.
The ISO sensitivity
and aperture
value setup will
be adjusted
automatically by the
camera.
and aperture
value setup will
be adjusted
automatically by the
camera.
on
You can adjust the
ISO sensitivity and
aperture value on
the electronic flash.
ISO sensitivity and
aperture value on
the electronic flash.
e00_r2062_cs2j.indb 31
e00_r2062_cs2j.indb 31
2007/08/01 14:44:00
2007/08/01 14:44:00