Olympus 260116 ユーザーズマニュアル

EN

In AUTO mode:
Out of light control 
range

(camera with 

communication 

capability)

Change the camera’s ISO sensitivity 
or aperture setting.

P. 16

(camera without 

communication 

capability)

P. 38

In MANUAL mode:
Subject too close

When the optimum shooting distance 
is less than 0.6 m (1.9 ft.) (0.5 m 
(1.6 ft.) in case of close-up flash), 
the displayed value blinks to alert 
you that the shooting range does 
not match the light emission area of 
the flash.
1 Change the camera’s ISO 

sensitivity or aperture setting.

2 Change the guide number setting.

P. 17

In FP MANUAL 
mode:
Subject too close

1 Change the camera’s ISO 

sensitivity or aperture setting.

2 Change the guide number setting.

P. 20

In all modes:
Wide panel
request warning

Set the wide panel.

P. 26

In all modes:
Downward bounce

The light-emitting section is tilted 7° 
downwards.
Cancel this setting except for close-
up flash photography.

P. 27

In all modes:
Wide panel 
warning

The wide panel is set.
Pay attention to the distance to the 
subject since the guide number will 
be lower.

P. 26

e00_r2062_cs2j.indb   41

e00_r2062_cs2j.indb   41

2007/08/01   14:44:01

2007/08/01   14:44:01