Aiptek A-V5Z5S ユーザーズマニュアル

To insert a memory card, do the followings:

(1) Open the SD/MMC card cover. 

(2) Gently push the card until the card reaches the bottom of the slot. 

To remove the memory card, gently push the card and it will pop up. Then pull the card 

out of the slot. 

Please charge the battery at least 8 hours for first time use.

1. Connect the cable. 

Connect one end of the supplied AC adapter to the USB port of the 

camcorder and the other end to a wall outlet. 

OR 

Connect one end of the supplied USB cable to the USB port of the camcorder and the other 

end to a powered PC. Make sure the camcorder is powered off.

2. The charging LED turns red and the charge starts.
3. When the charging is interrupted or the battery pack is fully charged, the charging LED will 

turn green.

 When using a PC to charge the battery, do not power on the camcorder, or  

  the charge will stop.

1. Press the 

Push button first and slide the battery cover open.

2. Place the accessory Li-Ion battery into the compartment. Note 

that the metallic contacts must be aligned with the contacts in the 

compartment.

3. After the battery is properly installed, replace the battery cover.

Open the LCD monitor or press and hold down the 

Power button for 1 second to turn on 

the camcorder.

To turn off the camcorder, press and hold down the 

Power button for 1 ~ 3 seconds or 

close the LCD monitor.

 If the camcorder stays inactive for a long period of time, it may automatically 

shut down due to the Auto-Off setting.