JVC GR-SXM540 ユーザーズマニュアル
22
ADVANCED FEATURES
Night-Alive
Makes dark subjects or areas even brighter than
they would be under good natural lighting.
they would be under good natural lighting.
1) Set the Power Switch
@
to “
” or “
”.
2) Press NIGHT-ALIVE
e
repeatedly until the
desired mode appears.
A NIGHT AUTO: The shutter speed is auto-
matically adjusted (maximum 1/6 sec.).
1 NIGHT 10X (only when the Power Switch
@
is set to “
”): The shutter speed is set to 1/6th of
a second to provide 10 times the sensitivity.
2 NIGHT 60X (only when the Power Switch
@
is set to “
”): The shutter speed is set to 1 second
to provide 60 times the sensitivity.
• To cancel the effect, press NIGHT-ALIVE
• To cancel the effect, press NIGHT-ALIVE
e
repeatedly until “OFF” appears.
• During Night-Alive, the following cannot be
activated: “Picture Stabilizer”, “Program AE With
Special Effects”, “Digital Effects” and “S.LX” in
CAMERA MENU (
Special Effects”, “Digital Effects” and “S.LX” in
CAMERA MENU (
pg. 19).
• Night-Alive does not work when LIGHT OFF/
AUTO/ON
#
is set to “AUTO” or “ON” (
pg. 13,
“Video Light”).
• During Night-Alive, it may be difficult to bring the
camcorder into focus. To prevent this, use of a
tripod is recommended.
tripod is recommended.
Fade/Wipe Effects
Fade- or wipe-in works at recording start, and fade-
or wipe-out works at recording end.
or wipe-out works at recording end.
1) Set the Power Switch
@
to “
”.
2) Press FADE/WIPE
)
repeatedly until the
desired mode appears.
3) Press the Recording Start/Stop Button
!
to
activate fade-in/out or wipe-in/out.
• Pressing and holding the Recording Start/Stop
Button
!
allows you to vary the length for the
image during fade in/out or wipe in/out.
• To cancel a fade or wipe, press FADE/WIPE
)
repeatedly until “OFF” appears.
FADER: Fades in/out to a black screen.
MOSAIC (Fader): Gradually turns/returns the
picture into/from a mosaic pattern.
SHUTTER (Wipe): A black screen moves in
from the top and bottom, closing over the image
like a shutter, or a new image pushes open the
black screen vertically from the center.
like a shutter, or a new image pushes open the
black screen vertically from the center.
SLIDE (Wipe): A black screen moves in from
the left to gradually cover the image, or a new
image moves in from right to left.
image moves in from right to left.
DOOR (Wipe): Wipes in as the two halves of
a black screen open to the left and right, revealing
the scene, or wipes out and the black screen
reappears from left and right to cover the scene.
the scene, or wipes out and the black screen
reappears from left and right to cover the scene.
CORNER (Wipe): Wipes in on a black screen
from the upper right to the lower left corner,
revealing the scene, or wipes out from lower left to
upper right, leaving a black screen.
revealing the scene, or wipes out from lower left to
upper right, leaving a black screen.
WINDOW (Wipe): Wipes in on a black screen
from the center of the screen towards the corners,
revealing the scene, or wipe out from the corners
to the center, leaving a black screen.
revealing the scene, or wipe out from the corners
to the center, leaving a black screen.
GR-SXM745/540U_EN
02.7.19, 9:25 AM
22