JVC GY-HM600U ユーザーズマニュアル

For setting the brightness of the viewfinder screen.

Increasing the value increases the brightness.

[Setting Values: -10 to +10 (R 0)]

For setting the difference in luminance between the

darkest and brightness areas in the viewfinder

screen.

Increasing the value increases the contrast.

[Setting Values: -10 to +10 (R 0)]

For setting the difference in luminance between the

darkest and brightness areas in the LCD monitor.

Increasing the value increases the contrast.

[Setting Values: -10 to +10 (R 0)]

For setting the brightness of the LCD monitor

backlight.

[Setting Values: Bright, RNormal]

For specifying the image display method when

facing the LCD monitor.

Select “Mirror” to display the image after laterally

inverting it. (Mirror display)

[Setting Values: Mirror, RNormal]
Memo : 

0

The setting of this item is valid only in Camera

mode.

0

During color bar, menu screen and status

screen display, the “Mirror” setting is disabled.

 

For setting whether to add color to the contour of

the focused image upon switching the image to

black-and-white.

[Setting Values: On, ROff]

9

For specifying the operation when the [FOCUS

ASSIST/1] button is pressed.

0

ACCU-Focus:

Enables the Focus Assist and ACCU-Focus

(forced focus) functions. The depth of field of the

object becomes shallower to enable easier

focusing. The ACCU-Focus function switches

automatically to “Off” after about 10 seconds.

0

Normal:

Enables only the Focus Assist function. The

focused area is displayed in color to enable

easier focusing. Display color can be specified

with [Color].

[Setting Values: ACCU-Focus, RNormal]

9

For setting the display color of the focused area

when Focus Assist is activated.

[Setting Values: RBlue, Green, Red]

For selecting whether to display zebra patterns at

the bright areas of the subject.

Select “On” to display zebra patterns or “Off” to

hide.

[Setting Values: On, ROff]

9

For setting the maximum luminance level for the

zebra pattern display.

[Setting Values: Over, 100% to 5% (in 5%

increments)] (R80%)

9

For setting the minimum luminance level for the

zebra pattern display.

[Setting Values: 100% to 0% (in 5% increments)]

(R70%)
Memo : 

0

The relation between Top and Bottom is such

that Top>Bottom always holds. To maintain this

relation when setting Top, the Bottom value is

automatically corrected.

98