JVC GR-DVX88 取り扱いマニュアル

EN

Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 22 and 23.

Set the VIDEO/DSC Switch to “VIDEO” (GR-
DVX88/DVX77 only), then set the camcorder’s
Power Switch to “

” while pressing down the

Lock Button located on the switch, turn on the
VCR’s power, and insert the appropriate cassettes in
the camcorder and the VCR.

Engage the VCR’s AUX and Record-Pause modes.

Engage the camcorder’s Play mode to find a spot just
before the edit-in point. Once it is reached, press
4

/6 on the camcorder.

Press 4/6 on the camcorder and engage the VCR’s
Record mode.

Engage the VCR’s Record-Pause mode and press
4

/6 on the camcorder.

Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.

●

墌 

●

As the camcorder starts to play your footage it will

appear on your TV. This will confirm the connections

and the AUX channel for dubbing purposes.

●

Before you start dubbing, make sure that the

indications do not appear on the connected TV. If they

do, they are being recorded onto the new tape.

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen (

墌 pg. 42, 43).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (

墌

 

pg. 42, 43).

•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the

Menu Screen (

墌 pg. 42, 43). Or, press DISPLAY on

the remote control.

●

Set the video out select switch of the cable adapter as

required:

Y/C

: When connecting to a TV or VCR which accepts

Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does

not accept Y/C signals and uses an audio/video
cable.

●

You can use Playback Zoom (

墌

 pg. 64) or Playback

Special Effects (

墌

 pg. 65) in step 5.

* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.

Cable Adapter
(provided)
If your VCR has a
SCART connector, use
the provided cable
adapter.