JVC GR-DX25 ユーザーズマニュアル

ページ / 48
EN
17
Fade/Wipe Effects
These effects let you make pro-style scene transitions.
Use them to spice up the transition from one scene to
the next.
Fade or Wipe works when tape recording is started or
when you stop recording.
1
Set the Power Switch 
8
 to “
” while pressing
down the Lock Button 
0
 located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
2
Press MENU 
2
. The Menu Screen appears.
3
Press + or  
3
 to select “
 (WIPE/FADER)”, then
press SELECT/SET 
1
.
4
Press + or  
3
 to select the desired function, then
press SELECT/SET 
1
. Selection is complete. Press
SELECT/SET 
1
 again.
• The WIPE/FADER Menu disappears and the effect is
reserved. The indicator representing the selected
effect appears.
5
Press the Recording Start/Stop Button 
7
 to activate
the Fade-in/out or Wipe-in/out.
To Deactivate The Selected Effect . . .
..... select “OFF” in step 4.
IMPORTANT
Some Fade/Wipe Effects cannot be used with certain
modes of Programme AE with special effects
(
 pg. 16). If an unusable Fade/Wipe Effect is
selected, its indicator blinks or goes out.
NOTE:
You can extend the length of a Fade or Wipe by pressing
and holding the Recording Start/Stop Button 
7
.
 FADER — WHITE
Fade in or out with a white screen.
 FADER — BLACK
Fade in or out with a black screen.
  FADER — B.W
Fade in to a colour screen from a black and white
screen, or fade out from colour to black and white.
 WIPE — CORNER
Wipe in on a black screen from the upper right to the
lower left corner, or wipe out from lower left to upper
right, leaving a black screen.
 WIPE — WINDOW
The scene starts in the centre of a black screen and
wipes in toward the corners, or comes in from the
corners, gradually wiping out to the centre.
 WIPE — SLIDE
Wipe in from right to left, or wipe out from left to right.
 WIPE — DOOR
Wipe in as the two halves of a black screen open to the
left and right, revealing the scene, or wipe out and the
black screen reappears from left and right to cover the
scene.
 WIPE — SCROLL
The scene wipes in from the bottom to the top of a
black screen, or wipes out from top to bottom, leaving a
black screen.
 WIPE — SHUTTER
Wipe in from the centre of a black screen toward the
top and bottom, or wipe out from the top and bottom
toward the centre leaving a black screen.
FOR RECORDING
3
1
2
7
8
0
  01 DX55/45/35/25EK_EN 16-23
03.1.23, 1:44 PM
17