JVC GZ-HM200 ユーザーズマニュアル

When the video was recorded with x.v.Color™ 

set to [ON], change the x.v.Color™ setting on 

TV. For details, refer to the TV’s instruction 

manual.

Connecting the camcorder to an HDMI-CEC*-

enabled TV using the HDMI cable allows you 

to utilize the following convenient functions.

* HDMI-CEC (Consumer Electronics Control) 

is an industry standard that enables 

interoperability between HDMI-CEC 

compliant devices that are connected via 

HDMI cables.

• Not all HDMI-control devices comply with 

the HDMI-CEC standard. The HDMI control 

function of the camcorder will not work when 

connected to these devices.

• The camcorder is not guaranteed to operate 

with all HDMI-CEC-enabled devices.

• HDMI-CEC does not function immediately 

after inserting the AC adapter to the AC 

outlet. Open the LCD monitor to turn on the 

camcorder.

• Connect an HDMI cable between the 

camcorder and the TV. (Z p. 30)

• Turn on the TV and set the HDMI-CEC 

related setting to on. (For details, refer to the 

instruction manual of the TV.)

• Turn on the camcorder and set [HDMI 

CONTROL] to [ON] from the MENU. 

Select the

playback mode.

The TV 

automatically 

switches to the 

HDMI input. (Turn on 

the TV beforehand.)

Turn off the TV.

The camcorder turns 

off automatically.

 

Depending on the TV connected, the display 

language of the camcorder will automatically 

switch to the language that is used for the TV 

when the camcorder is turned on.  

(This is applicable only if the camcorder 

supports the language selected for the TV.) 

To use the camcorder with a language that 

differs from the display language of the TV, set 

[HDMI CONTROL] to [OFF] from the MENU.

•

 The display language of the TV will not 

switch automatically, even if the display 

language of the camcorder is changed. 

•

 These functions may not work correctly 

when devices such as amplifier and selector 

are connected. Set [HDMI CONTROL] to 

[OFF] from the MENU.

•

 If HDMI-CEC does not work properly, turn 

off and on the camcorder again.





