Olympus 100 ユーザーズマニュアル

16

17

No display

————————

Selftimer

Remote Control

3.5m (11.5 ft)

5m (16.4 ft)

30˚

1

2

3

REMOTE CONTROL

RC-300C

Secure the camera on a tripod or other support. Compose your shot in
the viewfinder. Press the shutter release button halfway (the focus and
exposure are locked at this time). Then press the shutter release button
all the way. The selftimer indicator lights for about 10 seconds and then
blinks for about 2 seconds. After this, the shutter will release.

Press the selftimer/remote control
button (

/ ). The mode switches in

the order shown below. The selected
mode is displayed on the LCD panel.

Compose your shot in the viewfinder.
Position the autofocus frame on your
subject. To take a picture, point the
remote control at the camera and
press the button on the remote
control. The selftimer/remote control
indicator starts blinking, and the
shutter will release about 3 seconds
later.

1. Turn the screw on the bottom of the

remote control counterclockwise to
loosen.

2. Turn the remote control over, and

remove the cover. With the battery
facing up, remove the old battery
and insert a new battery as shown.

3. Replace the cover, turn the remote

control over, and  turn the screw on
the bottom clockwise to tighten.