Nikon 1 J2 ユーザーズマニュアル
89
Q
❚❚ HDMI Device Control
To control the camera remotely from a device that supports
HDMI-CEC (High-Definition Multimedia Interface–Consumer
Electronics Control), select On for HDMI device control in the
camera setup menu. The HDMI-CEC device will display a remote
control guide and the remote control can be used in place of the
following camera controls:
To control the camera remotely from a device that supports
HDMI-CEC (High-Definition Multimedia Interface–Consumer
Electronics Control), select On for HDMI device control in the
camera setup menu. The HDMI-CEC device will display a remote
control guide and the remote control can be used in place of the
following camera controls:
The remote control guide can be hidden or displayed at any time
by pressing the yellow button on the remote control. See the
television manual for details.
by pressing the yellow button on the remote control. See the
television manual for details.
D
Close the Connector Cover
Close the connector cover when the connectors are not in use. Foreign
matter in the connectors can interfere with data transfer.
matter in the connectors can interfere with data transfer.
A
Television Playback
Volume can be adjusted using the controls on the television; adjusting
volume on the camera has no effect. Use of an EH-5b AC adapter and
EP-5C power connector (available separately) is recommended for
extended playback.
volume on the camera has no effect. Use of an EH-5b AC adapter and
EP-5C power connector (available separately) is recommended for
extended playback.
Camera
Remote control
1, 3, 4, 2
Up, down, left, and right buttons
J
Center button
K
Blue button
G
Red button
Slide show menu (
Green button