Nikon 1 J2 ユーザーズマニュアル
183
n
Shooting (P, S, A, and M Modes)
No photo taken when remote control shutter-release button is pressed
:
• Replace battery in remote control (
• Choose a remote control mode (
• The remote control standby timer has expired (
• The remote is not pointed at the camera or the infrared receiver is not
visible (
• The remote is too far from the camera (
• Bright light is interfering with remote.
Smudges appear in photographs
Smudges appear in photographs
: Clean the front and rear lens elements or the
dust shield (
Flicker or banding appears in movies or in the displays
: Choose a Flicker reduc-
tion setting that matches the local AC power supply (
Menu items are unavailable
: Some options are only available in particular
shooting or exposure modes (
The shutter release is disabled
: You selected S Shutter-priority auto for
Exposure mode after selecting a shutter speed of “Bulb” in manual
exposure mode (
exposure mode (
0 113).
Some shutter speeds are not available
: You are using a flash.
Colors are unnatural
:
• Adjust white balance to match the light source (
• Adjust Picture Control settings (
Cannot measure white balance
: The subject is too dark or too bright (
Picture Controls produce varying results
: A (auto) is selected for sharpening,
contrast, or saturation. For consistent results over a series of photos,
choose another setting (
choose another setting (
Picture Control brightness and contrast can not be adjusted
: Active D-Lighting is
on (
Metering can not be changed
: Exposure lock is in effect (
0 125).
Noise (reddish areas and other artifacts) appears in long time-exposures
: Enable
long-exposure noise reduction (