HP (Hewlett-Packard) 2425 TURBO ユーザーズマニュアル
7URXEOHVKRRWLQJ
&URZQ&RS\
7URXEOHVKRRWLQJ3ULQWHU3UREOHPV
7URXEOHVKRRWLQJ&URZQ&RS\
8QGHUVWDQGLQJWKH/('V
The scanner has three LEDs—Power (amber), Ready (green), and
Jam (red). Alone and in combination they indicate the scanner’s
status.
Jam (red). Alone and in combination they indicate the scanner’s
status.
If these LEDs are. . .
they indicate. . . Do this . . .
Power
Ready
Jam
Off
Off
Off
Not ready to
copy.
copy.
Ensure that the power cord is
firmly plugged into the power
supply and the scanner and
that the scanner is turned on.
firmly plugged into the power
supply and the scanner and
that the scanner is turned on.
On
Off
Off
The scanner
has been turned
on.
has been turned
on.
Wait for the Ready LED to
light.
light.
On
On
Off
Ready to copy.
Copy.
On
On
On
Paper jam.
On
Off
Blinking ADF cover open. See chapter 5, the “Removing
a Paper Jam” section, of the
Options manual for
information on opening and
closing the ADF cover. If
necessary, turn the scanner
off and on again.
Options manual for
information on opening and
closing the ADF cover. If
necessary, turn the scanner
off and on again.
On
Blinking Off
Lamp failure—
the lamp is either
burnt out or too
dark due to
aging.
the lamp is either
burnt out or too
dark due to
aging.
manual for instructions.
On
Blinking Blinking A service
problem.
Check that the shipping
bracket was removed. If this
does not solve your problem
contact your vendor.
bracket was removed. If this
does not solve your problem
contact your vendor.