HP (Hewlett-Packard) 2425 TURBO ユーザーズマニュアル
3ULQWHU3UREOHP
&KHFNOLVW
7URXEOHVKRRWLQJ3ULQWHU3UREOHPV
Are all the printer covers closed securely?
Is there a media jam? If a paper jam message displays
and the Error indicator lights, go to one of the following
sections in this chapter on clearing a media jam.
and the Error indicator lights, go to one of the following
sections in this chapter on clearing a media jam.
3
Is the printer receiving data from the computer? If the Data
indicator blinks after a file is sent, the printer is receiving the
data. If not, check the following:
indicator blinks after a file is sent, the printer is receiving the
data. If not, check the following:
Is the printer on line? The online indicator should be on
and the message window should display
and the message window should display
IDLE
.
Has the emulation been changed from ESP to an emula-
tion that doesn’t match the file you are sending? See
chapter 4, “Printer Configuration,” in the
tion that doesn’t match the file you are sending? See
chapter 4, “Printer Configuration,” in the
guide.
Print a status page from the control panel. If you are
using the serial interface, is the baud rate (speed of data
transmission) of the printer, the computer, and your soft-
ware application the same? See chapter 4, “Printer Con-
figuration,” in the
using the serial interface, is the baud rate (speed of data
transmission) of the printer, the computer, and your soft-
ware application the same? See chapter 4, “Printer Con-
figuration,” in the
If you still cannot identify the problem, contact your QMS
vendor.
vendor.
4
Is the printer printing codes or not printing at all when in
ESP mode?
ESP mode?
Reconfigure the port to the specific printer emulation of
the file you are trying to print. See chapter 4, “Printer
Configuration,” in the
the file you are trying to print. See chapter 4, “Printer
Configuration,” in the
Reference guide for instructions.
If a PostScript file prints PostScript emulation statements
while in ESP mode, increase the ESP timeout. See chap-
ter 4, “Printer Configuration,” in your
while in ESP mode, increase the ESP timeout. See chap-
ter 4, “Printer Configuration,” in your
Reference guide to
change it from the control panel.
If you continue to have problems with the ESP mode
selecting the appropriate printer emulation, contact your
QMS vendor.
selecting the appropriate printer emulation, contact your
QMS vendor.