Fujifilm F100fd ユーザーズマニュアル
83
Advanced Features —
Playback
C Point the camera’s infrared port towards the front of the
camera’s infrared port (
➝p.12). Transmission distance
is about 5 to 20 cm (2 to 7.9 in.) within approx. 15°.
CAUTION
• Check that your camera is turned on when transmitting
the image data.
• If the image is 3:2 ratio, white lines may appear at the
top and bottom or right and left of the print, depending
on the printer type.
on the printer type.
• Movie images cannot be printed.
• Images photographed with a camera
• Images photographed with a camera
other than
FinePix F100fd may not be printed or transmitted.
• If the [QUALITY] of sending image data is over 3,
[QUALITY] of the image will be set to 3.
CHECK
• You can send the image data by simply pressing p
three times.
• Refer to the manual provided with the receiving device
for more information.
Receiving the image data from a FUJIFILM digital camera
is shown as an example here. You can receive data from
another device in the same way.
is shown as an example here. You can receive data from
another device in the same way.
A Turn the camera on.
D Press p to begin transmission.
When transmission is completed,
[TRANSMISSION COMPLETED] will
appear on the LCD monitor.
[TRANSMISSION COMPLETED] will
appear on the LCD monitor.
15˚
15˚
5~20 cm
(Angle: up to approx. 15°)
IR COMMUNICATION
IR COMMUNICATION
CONNECTING
CONNECTING
CANCEL
CANCEL
Receiving the image data
B Press p or q to select the sending frame
(file).
IR COMMUNICATION
IR COMMUNICATION
TRANSMIT
TRANSMIT
CANCEL
CANCEL
CANCEL
RECEIVE
RECEIVE
Setting the menu (
➝p.81)
Continued Q