Hasselblad H2 ユーザーズマニュアル

Drive

There are three drive modes:

Single, Continuous and when a ﬁlm mag-

azine is attached,

Multi exposure. They are all accessed by pressing the

DRIVE button on the grip.

Single

In Single mode, an exposure is made when the shutter release

button is pressed, the ﬁlm is advanced to the next frame and the

camera is made ready for the next exposure. To make the next

exposure however, you must ﬁrst release the shutter release button

and then press again.
In camera active mode:
1) Press the

DRIVE button on the grip.

2) Turn the front control wheel to:

Single

3) Press

Save to store the setting.

Continuous

In Continuous mode, the camera automatically continues to make

exposures and advance the ﬁlm for the next exposure as long as

you maintain pressure on the shutter release button (to the end of

the ﬁlm) at a rate of approximately 2 frames per second.
In camera active mode:
1) Press the

DRIVE button on the grip.

2) Turn the front control wheel to:

Continuous

3) Press

Save to store the setting.

Multi exposure (with ﬁlm magazine only)

In Multi exposure mode, the camera does not advance the ﬁlm after

the ﬁrst exposure, only at the end of the pre-determined number

of exposures. The frame options are: 2, 3, 4, 5 and ‘No limit’.
In camera active mode:
1) Press the

DRIVE button on the grip.

2) Turn the front control wheel to:

Multi exp.

3) Turn the rear control wheel to select the number of frames

required.

4) Press

Save (DRIVE button) to store the setting.

5) The LCD will display ﬁrstly that no frames have been exposed

in the multi-sequence (For example, in the case of a three
exposure setting the display will be Exp:0/3).

6) Press the shutter release button to make the ﬁrst exposure.
7) The LCD will display how many frames have been exposed

in the sequence (In the case of a three exposure setting the
display will now be Exp:1/3. After the next exposure, the LCD
would then display 2/3 etc)

8) You can change your mind at any time to exit the sequence

by pressing the

DRIVE button to advance the ﬁlm to the next

frame. The camera is then prepared for another new multi
exposure sequence according to the initial setting.



Please note this function is only available when a ﬁlm magazine

is attached. It is not available with digital backs.

�

��

�

��

�

��