Hasselblad H2 ユーザーズマニュアル

Imprint / Text

4.2.2 Text

In Text you can compose your own combination of letters, words, sym-
bols, etc for film edge information. The same procedure is also used to
change a Proﬁle name.

Text setting / Proﬁle name changing

1) Press the

MENU button on the grip.

2) Turn the front control wheel until

Settings appears.

3) Press the

Enter (DRIVE) button on the grip.

4) Turn the front control wheel to access

4.2 Image info.

5) Press the

Enter (DRIVE) button to 4.2.2 Text.

6) On the left side of the screen there is a small box frame con-

taining an X symbol and two arrow symbols. By turning the
front control wheel, the selector cursor will enter the box and
by turning the rear control wheel the selector cursor will move
up and down.

• When the X in the box is highlighted and the Sel.(AF) button is

pressed, the character highlighted in the text line lower down
the screen will be deleted.

• When an arrow in the box is highlighted, the text line cursor

moves along the text line in the arrow’s direction, moving past
every character with every click on the Sel.(AF) button to the
desired position. The highlighted character in the text line can
then be replaced by a new character chosen by moving the
selector cursor out of the box, positioning it over the new char-
acter to highlight it, and then pressing the Sel.(AF) button.

• By turning the front control wheel, the cursor moves horizontally.
• By turning the rear control wheel, the cursor moves verti-

cally and introduces all available characters by scrolling the
screen.

So, to write and store the characters, proceed as follows:
1) You can ﬁrstly clear an unwanted line of text by highlighting

the X symbol in the box and repeatedly pressing the

Sel.(AF)

button.

��

�

��

�

��

Sel.