Fujifilm FinePix A202 ユーザーズマニュアル

SETTING THE DATE AND TIME

Changing the date and time

To change the date and time:
1 Press the “MENU/OK” button.
2 Use “d” or “c” to select “

” OPTION and

then use “a” or “b” to select “SET–UP”.

3 Press the “MENU/OK” button.
4 Select “DATE/TIME” and press “c”.
See P.15 for information on setting the date and
time.

ＰＯＷＥＲＳＡＶＥ

ＤＡＴＥ／ＴＩＭＥ

ＵＳＢＭＯＤＥ

ＯＮ

ＩＭＡＧＥＤＩＳＰＬＡＹ

ＩＭＡＧＥＤＩＳＰＬＡＹＯＦＦ

ＯＦＦ

ＳＥＴ

ＤＳＣ

ＳＥＴ−ＵＰ

ＯＫ

ＢＡＣＫ

６／１９／２００２

ＤＡＴＥ／ＴＩＭＥ

ＭＭ／ＤＤ／ＹＹＹＹ

１１：５９

ＡＭ

ＯＫ

ＢＡＣＫ

◆

Power Save Function

◆

If the camera is not used for 2 minutes, this
function automatically switches it off.
When this function is enabled, the LCD monitor
switches off to conserve battery power if the
camera is not used in any way for 30 seconds
(See P.66 for details).

◆

Checking the remaining battery charge

◆

Switch the camera on and check that no battery
level warning (Z or X) is displayed on the
LCD monitor. If no icon is displayed, there is
ample charge left in the battery.

i Z Lit red:

Battery charge low. Replace or recharge the
battery as it will run out shortly.

i X Blinking red:

The battery is exhausted. The display will shortly
go blank and the camera will stop working.
Replace or recharge the battery.

●

The above estimates are for the Still photography
modes. In Playback mode, the transition from
“

” to “

” may take less time.

1Press “d” or “c” to select the date format.
2Press “a” or “b” to set the format. Refer to

the table below for details of the settings.

To change the date display format

You can select your preferred date format.

Displays the date in the “month/day/
year” format.

MM/DD/YYYY

Displays the date in the “day.month.
year” format.

DD.MM.YYYY

YYYY.MM.DD

Explanation

Setting

Displays the date in the “year.month.
day” format.