Fujifilm 2650 ユーザーズマニュアル
44
45
3
3
The self timer lamp lights for 5 seconds and then
starts flashing. 5 seconds later the camera emits
a short beep and takes the picture.
starts flashing. 5 seconds later the camera emits
a short beep and takes the picture.
Until the picture is taken, a countdown appears
on the LCD monitor.
Self-timer mode is automatically cancelled after
each shot.
on the LCD monitor.
Self-timer mode is automatically cancelled after
each shot.
●
!
To stop the self-timer once it has started running,
press the “BACK” button.
press the “BACK” button.
7
4
SELF−TIMER
OFF
ON
49
1M
= SELF-TIMER PHOTOGRAPHY
PHOTOGRAPHY MENU
✽ Displaying the menus (➡P.37)
Beep
49
49
1M
1M
1M
1M
2
1
0
1
0
2
0
3
When you set the self-timer to “ON”, “
=
” appears on
the LCD monitor.
In this mode, a timer runs for roughly 10 seconds
before the shutter is released. Use this mode for shots
such as photographs of yourself.
In this mode, a timer runs for roughly 10 seconds
before the shutter is released. Use this mode for shots
such as photographs of yourself.
1 Position the AF frame over your subject.
2 Press the shutter button down half way to set
2 Press the shutter button down half way to set
the focus.
3 Without releasing the shutter button, press it
down fully. The self-timer then starts running.
●
!
The self-timer is automatically cancelled in the following
situations:
situations:
• When shooting ends
• When you switch to “A” or “S” mode
• When the mode switch setting is changed
• When the camera is switched off
• When you switch to “A” or “S” mode
• When the mode switch setting is changed
• When the camera is switched off
●
!
You can also use the AF/AE lock (
➡P.27).
●
!
Be careful not to stand in front of the camera when you
press the shutter button as this can cause focusing or
exposure metering errors.
press the shutter button as this can cause focusing or
exposure metering errors.
This mode can be selected in the
“A” still photography mode.
“A” still photography mode.
Factory
default
default